UPVC Replacement Door Handles
As time passes, the handles on your doors will get worn out and require replacement. It is crucial to be able to match the dimensions of the handles that were previously used when replacing them.
The three measurements to be inspected are the top screw's position the lever and key hole dimensions. Use the size guide to assist you.
Inline Lever/Lever
A lever/lever handle is a contemporary door handle designed to work with new or replacement doors. This style of door handle is available in a wide range of styles and finishes. This handle is available from several manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The door handles of uPVC/Composite are made of robust materials and are suitable for multi-point lock doors that require a heavy duty design. The handles are inline and run off the same spindle and screw fixings so they are easily installed on new or existing uPVC/Composite doors.
The sprung lever design allows the handle to be placed and angled for comfortable operation and is suitable for all users. The handle has been tested to 200,000 cycles. This helps to ensure that the finish is of high quality and performance will last for a long time. The sprung lever is also adjustable to fit a broad range of locks. This is particularly useful for doors with narrower frames, in which the cylinder is further back. A shortened lever can also be used on doors with latches which can be operated with the thumb on the inside.
Lever Pad
The lever pad upvc handle is distinct from the lever handles that are found on most doors. These handle types are either operated by one spindle or two spindles, either inline or offset. They are typically employed on UPVC double glazed doors and come in many variations & styles.
The handles have been tested to a minimum of 200k cycles and are available in a variety of finishes including White and Silver, as well as Chrome & Gold. The finish is BS EN 1670 Grade 5 and resistant to corrosion. This gives the handle an outstanding performance and long-lasting durability for its intended purpose.
All UPVC lever pads for handles include a spindle and screws and can be installed on the uPVC door. The 211mm backplate fixing centres permit a bigger size handle that can often be a benefit when replacing a damaged or worn multi point door lock mechanism. These handle levers are also spring-loaded, thereby solving the issue of handles hanging from their horizontal position when they are not in use.
When selecting the replacement UPVC handle and spindle it is important to match the PZ dimensions of both the multipoint lock and the uPVC door. This measurement is also called 'handle centres or cylinder centre'. It is important for matching the correct handles.
Once you have the proper PZ size, you'll be required to make sure that the handle lever pads and push pads are in a suitable shape to fit the American with Disabilities Act (ADA) compatible handles you need for your doors. They are typically round or square, with an internal lever, and an external push pad.
The majority of the UPVC Lever Pads that we sell are spring-loaded. This means that they will return to a horizontal position after they are not in use instead of hanging and possibly sticking in the frame. This keeps draughts out of the home. The majority of UPVC lever pad style handles are available in left and right handed versions that allow them to be installed on either side of the doors.
Euro Cylinder
Cylinder locks can be found on uPVC and other types of doors. The cylinder lock operates by a key which unlocks the cylinder case. This reveals pins that can be aligned with the pins in the lock and allow them to rotate the camera that rotates, opening the door. Euro cylinders are available with up to six pins. External and internal doors require different levels of security.
Choosing the right cylinder is crucial; it is dependent on how your doors and handles are used. For instance, exterior doors require a more secure cylinder while doors inside can be secured with the standard cylinder. In addition, some cylinders are available with extra features which can enhance security further, such as anti-drill or anti-bump properties.
To ensure that the euro cylinder is of the right size for your door, it should be measured correctly. The cylinder should be measured from the hole in the center of the fixing screw to the end of the cylinder including the thumb turn if you have one. If you are unable to measure using the lock in a fixed position, you can take it out of it. It is important to ensure that there is no cylinder that extends beyond the handle or escutcheon. This could make it vulnerable to lock snapping attacks.
The design of many modern cylinders includes anti-drilling and bump resistance features. They are designed to decrease the chance of a attack by forcing the cylinder rotate in an opposite direction. This will help to prevent attacks and protect your doors.
There are cylinders that have been constructed to resist snapping. This is a growing method of attack on cylinders, where the break line inside the lock is targeted using a special tool to break the front of the cylinder to allow the door to open. This is a lot faster and less difficult than opening the door with a multipoint lock and leaves little evidence of a burglary, which can hinder an insurance claim.
Spring Cassette
This spring cassette is found inside the base plate of the door handle. It offers a spring-loaded solution to bring your multipoint lock handles back to their original position after usage. The handles had no spring and would drop when the locking mechanism was disconnected. Adding this simple component is one of the best ways to correct this issue and is an effective way to keep your doors made of upvc from becoming stuck in either closed or open position, as these aren't always easy to close manually.
These spring cassettes are specifically made for use with multipoint locks sprung They will not work with non-sprung multipoint handles. upvc door handles will require a custom hole cut into your backplate to allow these to fit (please look at the image for a technical diagram). They are a replacement for existing broken or missing cassettes within the door handle backplate of many kinds of uPVC doors. They are supplied in a single unit. They come with a square cut out that accommodates an 8mm shaft.
These spring cassettes are a fantastic value for money solution to the issue of door handles that are sliding. They are simple to install and will increase the lifespan of your uPVC doors. Contact us for more information about our range of uPVC accessories and spares. We are on hand to assist and offer professional advice.
